D20.40-A000-08
1 | Bolts | 4 | Coolant hoses | |
2 | Electrical connector | M4/14 | Cooler fan | |
3 | Mounting clip |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on coolant | ||
| Remove/install | ||
1 | Remove air filter housing. | ||
2 | Drain off coolant. | ||
3 | Remove coolant hoses (4). | Hose clamp pliers | |
4 | Release and disconnect electrical connector (2). | ||
5 | Unscrew screw/bolts (1). | ||
6 | Unclip retaining clip (3) with a suitable tool and guide out of the cooler fan (M4/14) upward. | ||
7 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Perform engine test run, check cooler fan (M4/14) for proper operation, and check engine cooling system in the area of the cooler for leak tightness. |
454 589 00 37 00
Hose clamp pliers
Referenced documents
- ah2000n208001a Notes on coolant
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar0910s1150eg Remove/install air filter housing
- ar2000d1142tsc Drain/pour in coolant
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
- as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.
- as4900z000101a Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust.