ar2020p0010sm

Remove, install exhaust gas recirculation coolant feed line

Type ar · topic 20.20 · version 0201 · 2007-11-06

Applies to: ENGINE 660.940 in MODEL 450.3 /4 with CODE (L27) Canada with CODE (K13) Diesel particulate filter

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.20 Radiator, coolant hoses — Series 450 (models 3**, 4**) · Series 660 (models 940)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.13 Line/hose/valve — Series 450 (models 3**, 4**) · Series 660 (models 940)

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.13 Line/hose/valve — Series 450 (models 3**, 4**) · Series 660 (models 940)

AR20.20-P-0010SM

Remove, install exhaust gas recirculation coolant feed line

25.1.06

ENGINE 660.940 in MODEL 450.3 /4
with CODE (L27) Canada
with CODE (K13) Diesel particulate filter

Remove, install exhaust gas recirculation coolant feed line

P20.20-2258-06

1 Pipe assembly

2 Coolant feed

3 Exhaust gas recirculation line

Modification notes

4.1.06

Distributor revised

Remove/install

1

Release rear drive module

AR01.00-P-3050SM

2

Drain coolant

AR20.00-P-1142SM

3

Remove hose clamp at pipe assembly (1)

4

Pull out coolant feed (2) from pipe assembly (1)

Remove tie straps

Installation: do not overtighten tie straps.

5

Remove hose clamp at exhaust gas recirculation line (3)

6

Pull out coolant feed (2)

Remove tie straps

Installation: do not overtighten tie straps.

7

Install in the reverse order

Referenced documents