AR20.20-P-0010MCF | Remove/install exhaust gas recirculation coolant feed line | 25.8.09 |
ENGINES 660.951 in MODEL 451.3 /4
P20.20-2379-08
1 Exhaust gas recirculation cooler
2 Mixing chamber
4 Click clamps
5 Coolant thermostat
3 Exhaust gas recirculation feed line coolant line
| Removing | ||
1 | Remove exhaust gas recirculation cooler (1) | Expose exhaust gas recirculation cooler (1) with mixing chamber (2) in engine compartment until exhaust gas recirculation coolant feed line (3) is accessible. | |
2 | Mark installation position of exhaust gas recirculation coolant feed line (3) on exhaust gas recirculation cooler (1) | Marking on exhaust gas recirculation coolant feed line (3) and exhaust gas recirculation cooler (1) must be clearly visible. | |
3 | Loosen snap clamps (4) and remove exhaust gas recirculation coolant feed line (3) from exhaust gas recirculation cooler (1) and coolant thermostat (5) | | |
| Install | ||
4 | Transfer marking to new exhaust gas recirculation coolant feed line (3) | When replacing exhaust gas recirculation coolant feed line (3). | |
5 | Push exhaust gas recirculation coolant feed line (3) to installation position marked on exhaust gas recirculation cooler (1) and fasten with snap clamp (4) | Replace snap clamp (4) | |
| |||
6 | Push exhaust gas recirculation coolant feed line (3) onto coolant thermostat (5) and fasten with snap clamps (4) | Replace snap clamp (4) | |
| |||
7 | Install exhaust gas recirculation cooler (1) |
Pliers
450 589 07 37 00
Referenced documents
- ar1420p7665mcf Remove/install exhaust gas recirculation cooler