ar2010p3000oid

Remove/install coolant pump switchover valve

Type ar · topic 20.10 · version 0100 · 2019-03-26

Applies to: Engine 656 in model 167

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.10 Coolant pump, coolant thermostat — Series 167 · Series 656

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.13 Line/hose/valve — Series 167 · Series 656

AR20.10-P-3000OID

Remove/install coolant pump switchover valve

19.03.2019

Engine

656 in model 167

Remove/install coolant pump switchover valve

1

Electrical connector

2

Vacuum lines

Y133

Coolant pump switchover valve

P20.10-2568-11

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove upper engine cover.

AR01.10-P-2405OID

2

Remove noise insulation before the coolant pump switchover valve (Y133).

3

Release electrical connector (1) and disconnect.

4

Remove vacuum lines (2) from coolant pump switchover valve (Y133).

5

Remove coolant pump switchover valve (Y133).

6

Install in the reverse order.

7

Read out and delete fault memory.

AD00.00-P-2000-06ME

Referenced documents