1 | Coolant pump switchover valve |
2 | Vacuum hoses |
3 | Bracket |
4 | Electrical connector |
D20.10-1140-76
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Remove lower engine compartment paneling | If installed. | |
3 | Remove vacuum hoses (2). | Removal: Note assignment of the vacuum hoses (2). | |
Installation: Note assignment of the vacuum hoses (2). | |||
4 | Disconnect electrical connection (4). | ||
5 | Remove coolant pump switchover valve (1). | For this purpose, remove coolant pump switchover valve (1) from bracket (3). | |
6 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Check for leaktightness when engine is running. | Visual inspection only. |
Referenced documents
- ah0060n010001ts Special instructions for lifting and supporting vehicle
- ar0060d100004ts Determine vehicle lift support points on vehicle for vehicle lift with support arms
- ar6120d1105ts Remove/install lower engine compartment lining
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.