1 | Electrical connector |
2 | Nuts |
3 | Electrical connector |
4 | Control unit |
S20.00-A054-76
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2 | Raise the vehicle on a vehicle lift. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
3 | Disconnect electrical connectors (1, 3). | ||
4 | Remove control unit (4). | For this purpose, remove nuts (2). | |
M6 | |||
5 | Install in the reverse order. | ||
| Check | ||
6 | Read out fault memory. | ||
| Connect/disconnect diagnostic unit | ||
If existing faults are stored, | |||
| |||
Erase the fault memory. |
Referenced documents
- ad0000s200006p Connect/disconnect diagnostic unit
- ah0060n010001p Special instructions for lifting and supporting vehicle
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar0060s100004p Determine vehicle lift support points on vehicle for vehicle lift with support arms
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.