ar1840b5111b

Remove/install oil level sensor

Type ar · topic 18.40 · version 0100 · 2016-02-12

Applies to: Cumbustion engine 612 with Vehicle 979.013, 979.016

Where it sits

Function group 1 Engine › 18 Engine lubrication, engine oil cooling › 18.40 Oil level/oil pressure sensor — Series 979 (models 013, 016)

EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.12 Sensor/switch/wiring harness — Series 979 (models 013, 016)

Also applies to engines/gearboxes: 612 ***

AR18.40-B-5111B

Remove/install oil level sensor

12.02.16

Cumbustion engine 612 with Vehicle 979.013, 979.016

Remove/install oil level sensor

B18.40-0006-01

1 Bolt

2 Electric connector

3 Oil level sensor

4 Sealing ring

	Remove and install
1	Drain the engine oil.		AP18.00-B-0101M
2	Lift out the connector (2) from the oil level sensor (3).
3	Unscrew the screw (1) and remove the oil level sensor (3).	Installing Check the sealing ring (4) and, if necessary replace.
			*BA18.40-B-1001-01C
4	Install in the reverse order
Danger!	Risk of accident by the unintentional rolling with the engine running. Risk of injury by crushing and burns at contact during the starting procedure or with the engine running	Protect the vehicle against unintentional move. Utilize closed and close fitting work clothes. Do not touch hot or spinning parts.	AS00.00-B-0005-01A
5	Checking for oil tightness	 Start the engine, warm it up and then stop it and check for tightness.

Oil level/oil pressure sensor

Número	Denominação				Engine 612.983


BA18.40-B-1001-01C	Oil pan oil level sensor			Nm	14

Referenced documents

ap1800b0101m Engine oil and oil filter change
as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.