ar1820d3471us

Remove/install oil filter housing

Type ar · topic 18.20 · version 0100 · 2007-09-13

Applies to: ENGINE 272.979 in MODEL 906

Where it sits

Function group 1 Engine › 18 Engine lubrication, engine oil cooling › 18.20 Oil filter — Series 906

EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.31 Filter/cooling/thermostat/fan/container — Series 906

Also applies to engines/gearboxes: 272 979

AR18.20-D-3471US

Remove/install oil filter housing

29.8.07

ENGINE 272.979 in MODEL 906

Remove/install oil filter housing

D18.20-0054-12

1 Oil filter housing

2 Timing case

3 Poly-V belt tensioning device

4 Coolant thermostat housing

5 Oil filter cover

Remove/install

1

Remove coolant thermostat housing (4)

AR20.10-D-2710US

2

Detach the poly-V belt tensioning device (3) at the timing case (2)

*BA13.25-N-1001-01R

3

Unscrew the oil filter cover (5) on the oil filter housing (1) and pull the oil filter element out of the oil filter housing (1)

The oil filter housing (1) is emptied when the oil filter element is pulled out.

Engine oil and filter change

AP18.00-D-0101H

4

Unscrew bolts on the oil filter housing (1) and remove the oil filter housing (1)

The oil filter housing (1) is fitted with six bolts. Collect engine oil which flows out.

Installation: Clean sealing surfaces and install new gasket.

Observe tightening sequence.

See

Bolt plan for oil filter housing (1)

AR18.20-D-3471-01US

*BA18.20-N-1002-01Q

5

Install in the reverse order

Belt tensioning device

Number

Designation

Engine
272.979
in model
906

BA13.25-N-1001-01R

Bolt, poly-V belt tensioning device to timing case cover

Nm

35

Oil filter

Number

Designation

Engine 272

BA18.20-N-1002-01Q

Bolt, oil filter housing to timing case cover

M8

8.8

Stage 1

Nm

5

Stage 2

°

20

M8

10.9

Stage 1

Nm

12

Stage 2

°

35

Referenced documents