ar1810p2000lfb
Remove/install the tensioning device for the oil pump chain
Type ar · topic 18.10 · version 0102 · 2014-11-03
Applies to: ENGINE 157, 276.9, 278 in MODEL 222 ENGINE 157, 278 in MODEL 217
Where it sits
Function group 1 Engine › 18 Engine lubrication, engine oil cooling › 18.10 Oil pump — Series 217 · Series 222
EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.30 Oil pump/drive/oil spray nozzle/oil suction pipe — Series 217 · Series 222
Also applies to engines/gearboxes: 157 ***, 276 9**, 278 ***
AR18.10-P-2000LFB
| Remove/install the tensioning device for the oil pump chain
| 16.10.2014
|
ENGINE
| 157, 276.9, 278 in MODEL 222
|
ENGINE
| 157, 278 in MODEL 217
|
1
| Oil pump
|
2
| Screw/bolt
|
3
| Tensioning device
|
Y130
| Engine oil pump valve
|
| Remove/install
|
|
|
1
| Remove oil pump (1)
|
| AR18.10-P-6020LFB
|
2
| Remove screw/bolt (2) and remove tensioning device (3) from oil pump (1)
| Fit bolt, chain tensioning bracket to oil pump cover
| *BA18.10-P-1004-01R
|
3
| Check clamping device (3) for wear and cracks
| If necessary:
|
|
|
|
|
|
|
|
|
| Replace clamping device (3)
|
|
4
| Install in the reverse order
|
|
|
Number
| Designation
|
| ENGINE 157
| ENGINE 276
|
BA18.10-P-1004-01R
| Fit bolt, chain tensioning bracket to oil pump cover
| Nm
| 9
| 9
|
Number
| Designation
|
| ENGINE 278
|
BA18.10-P-1004-01R
| Fit bolt, chain tensioning bracket to oil pump cover
| Nm
| 9
|
Referenced documents
