P15.60-2024-11
1 Securing clamp
2 O-ring
B11/4 Coolant temperature sensor
| Removing/installing | ||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
1 | Remove engine trim panel | Installation: Only install engine cover after the leak test. | |
2 | Remove the engine intake air duct downstream of the air filter | ||
3 | Detach electrical plug connector from coolant temperature sensor (B11/4) | ||
4 | Unlatch securing clamp (1) | ||
5 | Remove coolant temperature sensor (B11/4) | Installation: Install new O-ring (2). | |
6 | Install in reverse order | ||
7 | Inspect cooling system for leaks |
Referenced documents
- ar0110p2405ti Remove/install engine cover
- ar0910p8130ti Remove/install engine intake air duct downstream of air filter
- ar2000p1010ti Inspect cooling system for leaks
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.