ar1540d503201d

Separate, connect wiring harness at generator with tie

Type ar · topic 15.40 · version 0103 · 2001-01-19

Applies to: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

Where it sits

Function group 1 Engine › 15 Electrical system - engine › 15.40 Generator — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

EinPAS 25 On-board/network/multifunction › 25.20 On-board electrical system › 25.20.12 Sensor/switch/wiring harness — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

AR15.40-D-5032-01D

Separate, connect wiring harness at generator with tie

Separate, connect wiring harness at generator with tie

D15.40-0051-01

1 Separate wiring harness (1) at generator (G2).

Installation: Pay attention to installation position of cable connections.

2 Remove screw (2) at the securing clamp (3) and place wiring harness (1) to the side, tie up if necessary.

3 Install in reverse sequence.