ar1530t7100b

Remove/install starter

Type ar · topic 15.30 · version 0103 · 2012-02-16

Applies to: ENGINE 441.980 in MODEL 613.355 ENGINE 441.980 in MODEL 613.364 /365 ENGINE 402.970, 446.938 in MODEL 613.455 ENGINE 402.970, 446.938 in MODEL 613.485

Where it sits

Function group 1 Engine › 15 Electrical system - engine › 15.30 Starter — Series 441 (models 980) · Series 613 (models 355, 364, 365, 455, 485)

EinPAS 15 Engine › 15.35 Starter › 15.35.20 Starter — Series 441 (models 980) · Series 613 (models 355, 364, 365, 455, 485)

Also applies to engines/gearboxes: 402 970, 446 938

AR15.30-T-7100B

Remove/install starter

15.2.12

ENGINE 441.980 in MODEL 613.355

ENGINE 441.980 in MODEL 613.364 /365

ENGINE 402.970, 446.938 in MODEL 613.455

ENGINE 402.970, 446.938 in MODEL 613.485

Remove/install starter

T15.30-0004-11

1 Starter

2 Nut

3 Electrical wire

4 Nut

5 Dipstick guide tube

6 Nut

7 Oil pan

8 Timing case

Remove/install

1

Switch off ignition

2

Open service flap at rear left

Release battery tray and pull out.

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

3

Disconnect battery

Disconnect negative terminal. Ensure that no accidental contact can occur between the ground cable and the positive battery terminal.

Notes on battery

AH54.10-P-0001-01A

4

Detach lower engine compartment paneling

Models 613.355/455/485

AR61.20-T-1105B

Model 613.364/365

AR61.20-T-1105C

5

Take off dipstick guide tube (5)

Unscrew union nut (6) and then detach dipstick guide tube from oil pan (7).

6

Unscrew nuts (4) of electric cables (3) at starter (1)

7

Unscrew nuts (2) of starter at timing case (8)

*BA15.30-N-1002-01H

*000589642100

8

Take starter off stud bolt

9

Install in the reverse order

Starter

Number

Designation

Engine 402.970

Engine 441.980

Engine 446.938

BA15.30-N-1002-01H

Nut of starter to timing case

M12x1.5

Nm

80

80

80

Remove/install starter

Torque wrench

000 589 64 21 00

Referenced documents