ar1530g7100b

Removing/installing the starter

Type ar · topic 15.30 · version 0105 · 2012-02-16

Applies to: ENGINE 602.981

Where it sits

Function group 1 Engine › 15 Electrical system - engine › 15.30 Starter — Series 602 (models 981)

EinPAS 15 Engine › 15.35 Starter › 15.35.20 Starter — Series 602 (models 981)

AR15.30-G-7100B

Removing/installing the starter

15.2.12

ENGINE 602.981

Removing/installing the starter

G15.30-3101-06

1 Terminal 30 cable

2 Electric cable circuit 50

3 Bolts

4 Bracket

M1 Starter

Removing/installing

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground cable

2

Disconnect electric cables (1) terminal 30

*BA15.30-P-1001-01C

3

Disconnect electric cables (2) terminal 50

*BA15.30-P-1002-01C

4

Remove bracket (6)

5

Remove bolts (3)

*BA15.30-P-1003-01C

6

Remove starter (M1)

7

Install in reverse order

Starter

Number

Designation

Engines 601, 602, 604, 605, 606, 611, 628, 629

BA15.30-P-1001-01C

Nut for connection of circuit 30

Nm

14

BA15.30-P-1002-01C

Nut for connection of terminal 50

Nm

6

BA15.30-P-1003-01C

Bolt for starter

Nm

42

Referenced documents