Remove/install crankshaft Hall sensor

AR15.12-P-2136OID

Remove/install crankshaft Hall sensor

18.12.2018

Engine

656 in model 167

1

Screw

2

Electrical connector

B70

Crankshaft Hall sensor

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove lower center engine compartment lining.

AR61.20-P-1105ME

 Installation: Install bottom center engine compartment lining only after the leak test.

2

Release and disconnect electrical connector (2).

3

Remove screw (1).

 Position sensor for crankshaft to crankcase/timing case

*BA15.10-P-1001-03H

4

Remove crankshaft Hall sensor (B70).

5

Install in the reverse order.

6

Read out and delete fault memory.



AD00.00-P-2000-06ME

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out engine test run and check engine for proper leaktightness and leaktightness.

8

Install bottom center engine compartment lining.

AR61.20-P-1105ME

 Hall sensor

Number

Designation

Engine 656

BA15.10-P-1001-03H

Position sensor for crankshaft to crankcase/timing case

Nm

8