P15.12-2056-06
1 Bolts
2 Connector
3 Intake ignition cable
4 Outlet ignition cable
5 Connector
T1/1 Cylinder 1 ignition coil
T1/2 Cylinder 2 ignition coil
T1/3 Cylinder 3 ignition coil
P15.12-2057-01
6 Plug connections
7 Connector
8 Bolt
9 Cable duct
| Remove/Install | ||
1 | Disconnect battery ground cable | ||
2 | Remove CBS Rear | ||
3 | Remove engine compartment cover | ||
4 | Unplug connector (5) | ||
5 | Disconnect connectors (6) and unclip from bracket | ||
6 | Unplug connector (7) | ||
7 | Remove screw (8) | | |
8 | Pull out plug (2) of engine wiring harness at ignition coils | ||
9 | Open cover at cable duct (9) and remove engine wiring harness from cable duct (9) | ||
10 | Loosen catches at cable duct (9) and remove cable duct (9) | Do not damage catches | |
11 | Remove ignition cable entry (3) and ignition cable exit (4) at the ignition coils | In no case unplug ignition coil plug at the coil wire. The coil wire can be cracked from the connecting parts of the ignition coil plug and therefore be destroyed | |
12 | Undo bolts (1) and remove ignition coils | | |
13 | Install in the reverse order |
ECI ignition system
Referenced documents
- ar5410p0003rr Disconnect ground lead from battery
- ar8820p1900rr Remove/install CBS rear