ar1512d2145we

Remove/install camshaft sensor

Type ar · topic 15.12 · version 0102 · 2011-06-07

Applies to: ENGINES 651 in MODEL 900 ENGINES 651.955 /956 /957 in MODEL 906

Where it sits

Function group 1 Engine › 15 Electrical system - engine › 15.12 DI ignition system — Series 651 · Series 900 · Series 906

EinPAS 15 Engine › 15.17 Engine timing › 15.17.12 Sensor/switch/wiring harness — Series 651 · Series 900 · Series 906

AR15.12-D-2145WE

Remove/install camshaft sensor

23.5.11

ENGINES 651 in MODEL 900

ENGINES 651.955 /956 /957 in MODEL 906

Remove/install camshaft sensor

D15.12-1128-08

1 Cylinder head cover

2 Electrical connector

B6/23 Camshaft sensor

3 Bolt

 	Remove/install
1	Remove engine trim panel		AR01.10-D-2405WE
2	Disconnect electrical connector (2)
3	Unscrew bolt (3)		*BA15.10-N-1003-03B
4	Remove camshaft sensor (B6/23) from the cylinder head cover (1)	 Installation: Install new sealing ring.
5	Install in the reverse order
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
6	Carry out engine test run and check engine for leaks around camshaft sensor (B6/23)

 Hall sensor

Number	Designation			Engine 651 in model 900	Engine 651 in model 906


BA15.10-N-1003-03B	Camshaft sensor on cylinder head cover		Nm	6	6

Referenced documents

ar0110d2405we Remove/install engine cover
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.