Remove/install camshaft Hall sensor

AR15.10-P-2000H

Remove/install camshaft Hall sensor

3.2.09

21.10.05

Camshaft position sensor to cylinder head cover

Engine 285

*BA15.10-P-1002-03D

 

Remove/install

Danger!

Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.

Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

 Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Open engine hood

AR88.40-P-1000H

2

Remove charge air cooler on the left (1)

 For removing the camshaft Hall sensor, left cylinder bank (B6/2).

AR09.41-P-6817HH

3

Unplug plug (arrow)

4

Remove camshaft Hall sensor, left bank of cylinders (B6/2)

 Installation: Check the sealing ring, replace if required.



*BA15.10-P-1002-03D

5

Install in the reverse order

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

6

Run engine and inspect for oil leaks

7

Read out fault memory



Connect up STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Number

Designation

Engine
271, 275, 285

BA15.10-P-1002-03D

Camshaft position sensor to cylinder head cover

Nm

8