ar1510p2000ac

Remove/install camshaft Hall sensor

Type ar · topic 15.10 · version 0101 · 2006-07-26

Applies to: ENGINE 113.988 in MODEL 203.076 /276 ENGINE 113.989 in MODEL 171.473

Where it sits

Function group 1 Engine › 15 Electrical system - engine › 15.10 Ignition system, general — Series 171 (models 473) · Series 203 (models 076, 276)

EinPAS 15 Engine › 15.17 Engine timing › 15.17.12 Sensor/switch/wiring harness — Series 171 (models 473) · Series 203 (models 076, 276)

Also applies to engines/gearboxes: 113 988, 113 989

AR15.10-P-2000AC

Remove/install camshaft Hall sensor

27.1.04

ENGINE 113.988 in MODEL 203.076 /276

ENGINE 113.989 in MODEL 171.473

Remove/install camshaft Hall sensor

P15.10-2123-05

2 Screw

3 O-ring

B6/1 Camshaft Hall sensor

Remove/Install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Remove front engine cover

AR09.10-P-1150AC

2

Disconnect plug of electrical connection from camshaft Hall sensor (B6/1)

3

Remove camshaft Hall sensor (B6/1)

Installation: Replace O-ring (3).

*BA15.10-P-1002-03A

4

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

5

Run engine and inspect for oil leaks

6

Read out fault memory

When the work is complete stored faults must be worked on in the diagnostic trouble code memories and erased.

The stored faults can be caused by removed cables during installation or test operations, as well as by simulation.

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

*WH58.30-Z-1048-13A

Position sensor

Number

Designation

Engine 113.987/
988/990/
991

Engine 113.989

BA15.10-P-1002-03A

Camshaft Hall sensor to cylinder head

Nm

8

8

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Referenced documents