ar1440w1002na

Remove/install antifreeze element in filter housing of pump module

Type ar · topic 14.40 · version 0100 · 2013-09-24

Applies to: ENGINE 934.9, 936.9 in MODEL 967

Where it sits

Function group 1 Engine › 14 Exhaust manifold, engine brake, emission control system › 14.40 Exhaust aftertreatment, AdBlue — Series 934 (models 9**) · Series 936 (models 9**) · Series 967

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.51 Pump/metering device/nozzle — Series 934 (models 9**) · Series 936 (models 9**) · Series 967

AR14.40-W-1002NA

Remove/install antifreeze element in filter housing of pump module

9.9.13

ENGINE

934.9, 936.9 in MODEL 967

Remove/install antifreeze element in filter housing of pump module

W14.40-1618-09

1

Pump module

3

Separating diaphragm

5

Antifreeze protection cap

2

Connecting body

4

Antifreeze protection pressure piece

6

Bolts

Danger !

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Remove/install

1

Remove frost protection cover (5)

Antifreeze cover to pump module connector body

*BA14.40-N-1015-02J

2

Remove frost protection thrust piece (4)

3

Remove separating membrane (3)

Catch escaping AdBlue®using a dry clean cloth and dry off pump module (1).

4

Install in the reverse order

Exhaust aftertreatment, BlueTec®

Number

Designation

ENGINE 934.9

ENGINE 936.9

BA14.40-N-1015-02J

Antifreeze cover to pump module connector body

Nm

4

4

Referenced documents