ar1440w1002md

Remove/install antifreeze element in filter housing of pump module

Type ar · topic 14.40 · version 0101 · 2013-08-29

Applies to: ENGINE 936.9 in MODEL 963, 964

Where it sits

Function group 1 Engine › 14 Exhaust manifold, engine brake, emission control system › 14.40 Exhaust aftertreatment, AdBlue — Series 936 (models 9**) · Series 963 · Series 964

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.51 Pump/metering device/nozzle — Series 936 (models 9**) · Series 963 · Series 964

AR14.40-W-1002MD

Remove/install antifreeze element in filter housing of pump module

2.5.13

ENGINE

936.9 in MODEL 963, 964

Remove/install antifreeze element in filter housing of pump module

W14.40-1618-09

1

Pump module

3

Separating diaphragm

5

Antifreeze protection cap

2

Connecting body

4

Antifreeze protection pressure piece

6

Screw/bolts

Remove/install

Danger !

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Remove frost protection cover (5)

Antifreeze cover to pump module connector body

*BA14.40-N-1015-02J

Remove frost protection thrust piece (4)

Remove separating membrane (3)

Catch escaping AdBlue®using a dry clean cloth and dry off pump module (1).

Install in the reverse order

Exhaust aftertreatment, BlueTec®

Number

Designation

ENGINE 936.9

BA14.40-N-1015-02J

Antifreeze cover to pump module connector body

Nm

4

Referenced documents