S14.40-4538-08
Shown with engine 651 |
1 | Electrical line | B16/12 | Temperature sensor upstream of SCR catalytic converter | |
2 | Union nut | B16/12x1 | Electrical connection for temperature sensor upstream of SCR catalytic converter |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Remove right underfloor paneling |
| |
2 | Raise vehicle | ||
3 | Remove electrical line (1) from retaining clamps on heat shield | Installation: Check for a correct installation position. | |
4 | Disconnect electrical connection, temperature sensor upstream of SCR catalytic converter (B16/12x1) | ||
5 | Remove temperature sensor upstream of SCR catalytic converter (B16/12) | To do this unscrew union nut (2). | |
Nut, temperature sensor to SCR catalytic converter | |||
Tool kit | |||
6 | Install in the reverse order |
000 589 10 99 00
Tool kit
Referenced documents
- ar0060s1000e Lift/jack up vehicle
- ar6130s1001e Remove/install underbody paneling
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.