Series
en
ar1440b2018a
Remove/install SCR air humidity and air temperature combination sensor
Type ar · topic 14.40 · version 0401 · 2019-11-08
Applies to: Engine 924.9 in model 368, 384.0/2, 685.282/284/289/290 with code MS5 (Euro V) Engine 926.9 in model 368, 382.17/18, 384.0 with code MS5 (Euro V)
Where it sits
Function group 1 Engine › 14 Exhaust manifold, engine brake, emission control system › 14.40 Exhaust aftertreatment, AdBlue — Series 368 · Series 382 (models 17*, 18*) · Series 384 (models 0**, 2**) · Series 685 (models 282, 284, 289, 290)
EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.12 Sensor/switch/wiring harness — Series 368 · Series 382 (models 17*, 18*) · Series 384 (models 0**, 2**) · Series 685 (models 282, 284, 289, 290)
Also applies to engines/gearboxes: 924 9**, 926 9**
AR14.40-B-2018A
Remove/install SCR air humidity and air temperature combination sensor
23.10.2019
Engine
924.9 in model 368, 384.0/2, 685.282/284/289/290
with code MS5 (Euro V)
Engine
926.9 in model 368, 382.17/18, 384.0
with code MS5 (Euro V)
Represented on vehicle 382.17
1
Air inlet tube
2
Fastening bolt
3
Air temperature and humidity combined sensor
Represented on vehicle 384.0
1
Air inlet tube
2
Fastening bolt
3
SCR air temperature and humidity combined sensor
Remove/install
1
Turn off ignition
2
Open the engine access cover
3
Disconnect the SCR combined air humidity and temperature sensor (3)
4
Remove the SCR combined air humidity and temperature sensor (3)
.SCR combined sensor of air humidity and temperature in the fresh air pipe
*BA14.40-B-1024-02B
5
Install in reverse order
Exhaust gas after-treatment
Number
Designation
Engine 924.9, 926.9 except Liquid Only
BA14.40-B-1024-02B
SCR combined sensor of air humidity and temperature in the fresh air pipe
Nm
7
