ar1440b2003b

Remove/install SCR AdBlue pressure sensor

Type ar · topic 14.40 · version 0300 · 2016-02-12

Applies to: Cumbustion engine 457.9 with Vehicle 382.15# #D, 634.0## #D with CODE MS5 (BlueTec 5)

Where it sits

Function group 1 Engine › 14 Exhaust manifold, engine brake, emission control system › 14.40 Exhaust aftertreatment, AdBlue — Series 382 (models 15*) · Series 634 (models 0**)

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.12 Sensor/switch/wiring harness — Series 382 (models 15*) · Series 634 (models 0**)

Also applies to engines/gearboxes: 457 9**

AR14.40-B-2003B

Remove/install SCR AdBlue pressure sensor

12.02.16

Cumbustion engine 457.9 with Vehicle 382.15# #D, 634.0## #D with CODE MS5 (BlueTec 5)

Remove/install SCR AdBlue pressure sensor

B14.40-0015-08

1 Metering unit

2 O-ring

3 Electric plug

4 SCR AdBlue pressure sensor (17B05)

Remove and install

Danger!

Risk of burns and scalding at jobs on AdBlue pipes and on components connected to them. Risk of injuries on skin and eyes from contact with AdBlue. Risk of poisoning from AdBlue ingestion

Only collect AdBlue in appropriate containers. Only start working on the exhaust gas aftertreatment system after pressure relief.

AS14.40-B-0001-01A

Indications on applications, material properties and handling AdBlue

AH14.40-B-0001-01A

1

Turn-off the ignition

2

Open the access cover

3

Detach the electric plug (3) from the AdBlue pressure sensor (4)

4

Remove the AdBlue pressure sensor (4)

*BA14.40-B-1006-02C

5

Install in reverse order

Exhaust aftertreatment

Número

Denominação

Engine 457.9 with Code MS5

BA14.40-B-1006-02C

AdBlue pressure sensor SCR on dosage unit

Nm

30

Referenced documents