ar1322t0001cb

Remove/install poly V-belt guide

Type ar · topic 13.22 · version 0100 · 2005-07-12

Applies to: ENGINE 457.944 in MODELNMB613.367

Where it sits

Function group 1 Engine › 13 Air compressor, belt drives › 13.22 Single-belt drive — Series 613 (models 367)

EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — Series 613 (models 367)

Also applies to engines/gearboxes: 457 944

AR13.22-T-0001CB

Remove/install poly V-belt guide

15.4.03

ENGINE 457.944 in MODELNMB613.367

Remove/install poly V-belt guide

T13.22-0008-02

1 Tensioning device

2 Cover

3 Guide device

Remove/Install

Danger!

Lethal Hazard from being drawn into rotating vehicle parts

Do not reach into rotating parts.
Wear closed and snug-fitting work clothes.
Secure area of rotating vehicle components against unauthorized access.

AS00.00-Z-0004-01A

1

Open rear lid

2

Turn back tensioning device (1) and pull down simultaneously the poly-V-belt

Turn back tensioning device (1) via the bolt of the guide pulley, at the same time do not slacken the bolt.

Do not bend poly V-belt.

3

Take off cover (2)

Do not bend cover (2) strongly, in order to avoid damage.

4

Detach guide device (3)

Unscrew bolt of guide pulley which is located behind the cover (2).

Installation: Check condition and support of guide device (3), replace if necessary.

*BA13.22-N-1001-01C

5

Install in the reverse order

Single-belt drive

Number

Designation

Engine 457.9

BA13.22-N-1001-01C

Bolt of guide pulley to support

NM

50

Referenced documents