Remove/install poly-V-belt guide · ar1322t0001ba · Mercedes-Benz WIS

AR13.22-T-0001BA

Remove/install poly-V-belt guide

21.2.06

ENGINE 457.944 in model NMB613.358 /388

T13.22-0005-02

Shown on model 613.358 with rear axle 745.997

1 Deflection device

2 Poly-V-belt

3 Bolt

T13.20-0036-11

Shown on model 613.358 except version SAPTCO using rear axle 746.217

1 Deflection device

2 Poly-V-belt

3 Bolt

4 Poly-V-belt

5 Bolt

6 Deflection device

T13.20-0039-11

Shown on model 613.358 version SAPTCO using rear axle 746.217

1 Deflection device

2 Poly-V-belt

3 Bolt

4 Poly-V-belt

5 Bolt

6 Deflection device

Modification notes

24.8.04

Change in routing diagram and deflection device for poly-V-belt in combination with rear axle 746.217

Steps 2, 6, 7, 8

 	Remove/install
 Danger!	Lethal hazard from being drawn into rotating vehicle parts	Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.	AS00.00-Z-0004-01A
1	Open tailgate	 See operator's manual
2	Remove rear bumper	Only on model 613.358/388 with rear axle 746.217	AR88.20-T-2200B
3	Slacken poly-V-belt (2)	On perform operation steps to detension poly-V-belt (2).	AR13.21-T-1201BA
4	Remove bolt (3)		*BA13.22-N-1001-01C
			*000589642100
5	Remove deflection device (1)	Installation: Check condition of deflection device (1); replace deflection device (1) if necessary.
6	Loosen poly-V-belt (4)	Only on model 613.358/388 with rear axle 746.217	AR13.21-T-1201BA
		On perform operation steps to detension poly-V-belt (4).
7	Remove deflection devices (6)	Only on model 613.358/388 with rear axle 746.217
		Start by removing screws (5). It may be possible that only one guide pulley (6) is installed according to the version.
		Installation: Check condition of deflection devices (6); replace deflection devices (6) if necessary.
			*BA13.22-N-1001-01C
			*000589642100
8	Install in the reverse order
9	Tension poly-V-belt (2, 4)
	Inspect condition of V-belt, re-tension		AP13.20-T-1350BA

 Single-belt drive

Torque wrench

000 589 64 21 00

ap1320t1350ba Inspect condition of V-belt, re-tension
ar1321t1201ba Remove poly-V-belt of coolant pump and generator, install
ar8820t2200b Remove and install rear bumper
as0000z000401a Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.