Removing and installing charge air duct downstream of charge air cooler

Type ar · topic 09.50 · version 0100 · 2005-07-12

Applies to: ENGINE 441.980 in MODEL 613.355 ENGINE 402.970, 446.938 in MODEL 613.455 /485

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.50 Compressor — Series 441 (models 980) · Series 613 (models 355, 455, 485)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 441 (models 980) · Series 613 (models 355, 455, 485)

Also applies to engines/gearboxes: 402 970, 446 938

AR09.50-T-8680B

Removing and installing charge air duct downstream of charge air cooler

26.4.00

ENGINE 441.980 in MODEL 613.355

ENGINE 402.970, 446.938 in MODEL 613.455 /485

T09.41-0010-11

Shown on engine 402.970, 446.938

1 Hose clamp

2 Charge air duct

3 Air inlet connection of charge air cooler

 	Removal, installation
1	Remove engine compartment flap in interior of vehicle		AR88.40-T-1100B
2	Take off hose clamps (1) of charge air hose
3	Take off charge air duct (2) at air inlet connection of charge air cooler (3)	Installation: Replace gasket.
4	Install in the reverse order