AR09.50-P-8680T | Remove/install charge air duct downstream of charge air cooler | 9.12.02 |
ENGINE 648.961 in MODELS 211.023 /026 /223 /226
P09.50-2072-05
1 Bolts
2 Bolts
3 Charge air hose downstream of the charge air cooler
4 Charge air duct downstream of charge air cooler
5 Noise insulation
B17/8 Charge air temperature sensor
| Remove/Install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates below the hoist support points specified by the vehicle manufacturer. | |
1 | Remove bottom sections of sound-proofing capsule | ||
2 | Remove the charge air hose downstream of the charge air cooler (3) | Installation: Check the hose and the sealing rings for damage and replace if necessary to prevent leaks. Ensure the locking clamps are exactly installed. | |
Traces of oil or small quantities in the charge air hose come from the crankcase ventilation and are permissible. | |||
3 | Disconnect the electrical connector at the charge air temperature sensor (B17/8) | Do not lock or unlock the charge air temperature sensor (B17/8) with the connector inserted, otherwise the snap-in brackets will be overstretched. If the snap-in brackets are defective, replace the charge air temperature sensor (B17/8), see: | |
Remove/install charge air temperature sensor | |||
4 | Dismount muffler (5) from charge air duct downstream of charge air cooler (4) | For this step, unscrew bolts (1). | |
5 | Remove the charge air duct downstream of the charge air cooler (4) | Start by removing bolts (2). | |
6.1 | Remove charge air temperature sensor (B17/8) | Only when replacing the charge air duct downstream of the charge air cooler (4) | |
7 | Install in the reverse order |
Referenced documents
- ar0941p2002p Remove/install charge air temperature sensor
- ar9430p5300t Remove/install soundproofing bottom sections
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.