ar0941t2003u

Remove/install boost pressure/charge air temperature sensor

Type ar · topic 09.41 · version 0101 · 2011-02-10

Applies to: ENGINES 904.953 in MODEL 436.330

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 436 (models 330) · Series 904 (models 953)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 436 (models 330) · Series 904 (models 953)

AR09.41-T-2003U

Remove/install boost pressure/charge air temperature sensor

20.1.11

ENGINES 904.953 in MODEL 436.330

Remove/install boost pressure/charge air temperature sensor

T09.41-0057-02

1 Cover

2 Connector for engine wiring harness

B13 Charge air pressure and charge air temperature combination sensor

Remove/install

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.

AS60.80-Z-0001-01A

1

Tilt cab

AR60.80-T-0010U

Notes on tilting the cab

AH60.80-N-0003-01B

2

Take off cover (1)

3

Unplug the engine wiring harness connector (2) from the charge air pressure and charge air temperature combination sensor (B13)

4

Remove charge air pressure and charge air temperature combination sensor (B13)

*BA09.41-N-1008-01J

5

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
900.91/92, 902.92/93, 904.92/95, 906.935/95, 924.91/92/93, 926.96

BA09.41-N-1008-01J

Bolt, charge air combination sensor (temperature, pressure) to charge air manifold

Nm

10

Referenced documents