ar0941s6295ea

Remove/install boost pressure sensor for low-pressure exhaust gas turbocharger

Type ar · topic 09.41 · version 0100 · 2019-06-27

Applies to: Engine 654.9 in model 447

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 447 · Series 654 (models 9**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 447 · Series 654 (models 9**)

AR09.41-S-6295EA

Remove/install boost pressure sensor for low-pressure exhaust gas turbocharger

12.06.2019

Engine

654.9 in model 447

Remove/install boost pressure sensor for low-pressure exhaust gas turbocharger

1

Boost pressure sensor

2

Electrical connector

3

Screw

4

Sealing ring

5

Bracket

S09.41-A031-05

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove upper engine cover.

AR01.10-S-2405EA

2

Release and disconnect the electrical connector (2).

3

Remove screw (3) and pull boost pressure sensor (1) out of bracket (5).

Installation: Check sealing ring (4) for damage.

Screw, boost pressure sensor of low-pressure exhaust gas turbocharger to bracket

*BA09.41-N-1009-01EA

If the sealing ring (4) is damaged:

Replace boost pressure sensor (1).

4

Install in the reverse order.

5

Read out and delete fault memory.

AD00.00-S-2000-04E

Charge air pipe/charge air cooling

Number

Designation

Engine 654.9 in model 447

BA09.41-N-1009-01EA

Screw, boost pressure sensor of low-pressure exhaust gas turbocharger to bracket

Nm

6

Referenced documents