ar0941s2002cb

Remove/install charge air temperature sensor

Type ar · topic 09.41 · version 0101 · 2015-06-29

Applies to: Model 415 with engine 200

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 415

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 415

Also applies to engines/gearboxes: 200 ***

AR09.41-S-2002CB

Remove/install charge air temperature sensor

16.6.15

Model

415 with engine 200

Remove/install charge air temperature sensor

1

Electrical connection

2

Screw/bolt

B17/8

Temperature sensor downstream of charge air cooler

S09.41-4620-06

Remove/install

1

Disconnect electrical connection (1)

2

Remove temperature sensor downstream of charge air cooler (B17/8)

Remove screw/bolt (2) to do this.

Installation: Check sealing ring on temperature sensor downstream of charge air cooler (B17/8); inspect and, if necessary, replace.

Bolt, charge air temperature sensor to charge air pipe

*BA09.41-P-1002-01S

3

Install in the reverse order

4

Read out fault memory with diagnostic system

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-S-2000-04C

Clear existing errors.

Charge air pipe/charge air cooling

Number

Designation

Engine 200 in model 415

BA09.41-P-1002-01S

Bolt, charge air temperature sensor to charge air pipe

Nm

6

Referenced documents