ar0941s2001sd

Remove/install boost pressure sensor

Type ar · topic 09.41 · version 0105 · 2009-05-04

Applies to: ENGINES 646 in MODEL 636, 639 except CODE (KA1) Particulate filter

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 636 · Series 639 · Series 646

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 636 · Series 639 · Series 646

AR09.41-S-2001SD

Remove/install boost pressure sensor

22.4.09

ENGINES 646 in MODEL 636, 639 except CODE (KA1) Particulate filter

Remove/install boost pressure sensor

S09.41-4513-05

1 Electrical connector

2 Bolts

B5/1 Charge pressure sensor

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Detach front lower engine compartment paneling

Only model 636.813,

Model 639.7/8 Carry out as of vehicle identification number (VIN) 055347.

AR61.20-S-1105-02S

2

Disconnect electrical connector (1) to charge pressure sensor (B5/1)

3

Remove bolt (2)

*BA09.41-N-1008-01M

4

Remove charge pressure sensor (B5/1)

5

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
646 in model
636, 639

BA09.41-N-1008-01M

Bolt for boost pressure sensor

Nm

6

Referenced documents