1 | Electrical connection |
B5/6 | Boost pressure sensor |
S09.41-4572-06
| Remove/install | ||
1 | Remove vacuum reservoir | ||
2 | Remove brake fluid container from air-water-channel | Do not extract brake fluid, brake fluid reservoir is not completely removed. | |
3 | Disconnect electrical connection (1) | ||
4 | Remove boost pressure sensor (B5/6) | Screw/bolt, pressure sensor to charge air line | |
5 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Check for leaktightness with engine running | Visual inspection only. |
Referenced documents
- ar0709s0001e Remove/install vacuum reservoir
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.