Remove/install charge air pressure and temperature sensor downstream of throttle valve

AR09.41-P-2012MSA

Remove/install charge air pressure and temperature sensor downstream of throttle valve

17.08.2018

Engine

256.9 in model 213, 238, 257, 290

1

Screw

2

Electrical connector

B28/27

Pressure and temperature sensor downstream of throttle valve

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove air filter housing.

AR09.10-P-1150MSA

2

Release and disconnect electrical connector (2).

3

Remove screw (1).

 Bolt, pressure sensor to charge air distributor

*BA09.41-P-1012-01MRT

4

Remove pressure and temperature sensor downstream of throttle valve (B28/27).

5

Install in the reverse order.

6

Read out and delete fault memory.



Engine 256.9 in model 213

AD00.00-P-2000-04B



Engine 256.9 in model 238

AD00.00-P-2000-06LWO



Engine 256.9 in model 257, 290

AD00.00-P-2000-06FR

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out engine test run and check engine for proper leaktightness and leaktightness.

 Charge air pipe/charge air cooling

Number

Designation

Engine 256.9

BA09.41-P-1012-01MRT

Bolt, pressure sensor to charge air distributor

Nm

6