Remove/install charge air pressure and temperature sensor upstream of throttle valve

AR09.41-P-2011MRJ

Remove/install charge air pressure and temperature sensor upstream of throttle valve

25.10.2018

Engine

264 in model 222

Shown with code B01 (48V technology)

1

Electrical connector

2

Screw

B28/26

Pressure and temperature sensor upstream of throttle valve

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove engine air intake duct upstream of air filter.

2

Release electrical connector(1) and disconnect.

3

Remove screw/bolt (2).

 Screw/bolt, pressure sensor to charge air line

*BA09.41-P-1004-01ZA

4

Remove pressure and temperature sensor upstream of the throttle valve (B28/26) and seal opening with a suitable stop plug.

 Record plug

*129589009100

5

Install in the reverse order.

6

Read out and delete fault memory.



AD00.00-P-2000-04B

 Charge air pipe/charge air cooling

Number

Designation

Engine 264

BA09.41-P-1004-01ZA

Screw/bolt, pressure sensor to charge air line

Nm

6