ar0941g2003ch
Remove/install boost pressure/charge air temperature sensor
Type ar · topic 09.41 · version 0105 · 2018-10-17
Applies to: Engine 457.9, 458.9 in model 000.001 Engine 541.9, 542.9, 941.9, 942.9 in model 000.001
Where it sits
Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 000 (models 001) · Series 942 (models 9**)
EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 000 (models 001) · Series 942 (models 9**)
Also applies to engines/gearboxes: 457 9**, 458 9**, 541 9**, 542 9**, 941 9**
AR09.41-G-2003CH
| Remove/install boost pressure/charge air temperature sensor
| 02.10.2018
|
Engine
| 457.9, 458.9 in model 000.001
|
Engine
| 541.9, 542.9, 941.9, 942.9 in model 000.001
|
1
| Electrical connector
|
2
| Charge air pressure and temperature sensor
|
ENGINE 541.9, 542.9, 941.9, 942.9
|
1
| Electrical connector
|
2
| Charge air pressure and temperature sensor
|
| Remove/install
|
|
|
1
| Release and disconnect electrical connector (1) from charge air pressure and temperature sensor (2).
|
|
|
2
| Remove charge air pressure and temperature sensor (2).
| Screw, charge air pressure and temperature sensor to charge air distributor
| *BA09.41-N-1012-01L
|
3
| Check O-ring and pressure and charge air pressure and temperature sensor (2) for damage.
| If damage is present,
|
|
|
|
|
|
|
|
|
| Replace corresponding component.
|
|
4
| Install in the reverse order.
|
|
|
Charge air pipe/charge air cooling
|
Number
| Designation
|
| Engine 457.9, 458.9 in model 000.001
| Engine 541.9, 941.9 in model 000.001
|
BA09.41-N-1012-01L
| Screw, charge air pressure and temperature sensor to charge air distributor
| Nm
| 10
| 10
|
Charge air pipe/charge air cooling
|
Number
| Designation
|
| Engine 542.9, 942.9 in model 000.001
|
BA09.41-N-1012-01L
| Screw, charge air pressure and temperature sensor to charge air distributor
| Nm
| 10
|
