AR09.41-G-2003B | Remove/install boost pressure/charge air temperature sensor | 9.1.12 |
ENGINES 900.915 /916 /920 /921, 902.923 /924 /935, 904.927 /928 /952 /953, 906.935 /955, 924.916 /923 /931, 926.969
G09.41-3133-05
Shown on engine 904
1 Cap
2 Connector for engine wiring harness
3 Screw/bolt
B13 Charge air pressure and charge air temperature combination sensor
| Remove/install | ||
1.1 | Tilt cab | Model 405 , model 437.42/43 | |
1.2 | Open engine hood | Model 437.46 See information from vehicle manufacturer. | |
2 | Remove engine trim panel | Model 405.05 | |
3 | Remove cap (1) at charge air manifold | ||
4 | Unplug engine wiring harness connector (2) on charge air pressure and charge air temperature combination sensor (B13) | ||
5 | Remove bolts (3) and charge air pressure combination sensor and charge air temperature (B13) | Installation: Check O-ring for wear and damage; replace if necessary. | |
| |||
6 | Install in the reverse order |
Charge air pipe/charge air cooling
Referenced documents
- ar0110g2405e Remove/install engine cover
- ar6080g0005b Overview - Tilt cab to repair position and tilt it back to normal position
- ar6080g0005b