ar0941d2010r

Remove/install charge air temperature sensor in charge air housing

Type ar · topic 09.41 · version 0200 · 2015-06-29

Applies to: Engine 646 in model 909

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 646 · Series 909

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 646 · Series 909

AR09.41-D-2010R

Remove/install charge air temperature sensor in charge air housing

16.6.15

Engine

646 in model 909

Modification notes

12.6.15

Detach fuel filter at support, added

Operation step 1

Remove/install charge air temperature sensor in charge air housing

1

Charge air pipe

B17/9

Charge air temperature sensor

D09.41-1186-05

Remove/install

1

Detach fuel filter at support and place with attached hoses and attached electrical line to one side

AR47.20-D-1070R

2

Disconnect electrical connection at charge air temperature sensor (B17/9)

3

Unclip charge air temperature sensor (B17/9) and pull out of charge air pipe (1)

Installation: The charge air temperature sensor (B17/9) must engage audibly on the charge air pipe (1).

Check

4

Check sealing ring of charge air temperature sensor (B17/9) for damage

Replace charge air temperature sensor (B17/9) if necessary.

5

Install in the reverse order

Referenced documents