Remove/install boost pressure sensor

AR09.41-D-2006TSF

Remove/install boost pressure sensor

15.02.2018

Engine

651 in model 910

1

Electrical connector

2

Screw

3

Boost pressure sensor

4

Sealing ring

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove air filter housing

AR09.10-D-1150TSF

2

Remove engine cover

AR01.10-D-2405TSF

3

Disconnect electrical connection (1)

4

Remove boost pressure sensor (3)

 Unscrew screw/bolt (2) to do this.

 Installation: Check sealing ring (4).

 Screw/bolt, boost pressure sensor to charge air pipe

*BA09.41-N-1007-01TSF

Depending on findings



Replace compression ring (4).

5

Install in the reverse order



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leak tightness with engine running

 Visual inspection only.

 Charge air pipe/charge air cooling

Number

Designation

Engine 651 in model 910

BA09.41-N-1007-01TSF

Screw/bolt, boost pressure sensor to charge air pipe

Nm

5