ar0941b8681a
Remove/install charge air manifold
Type ar · topic 09.41 · version 0202 · 2020-02-08
Applies to: Engine 904.9, 906.9 (except 906.999), 924.9 (except 924.92), 926.9 (except 926.95) in model 368.0/1, 382.11/175/177/178/18, 384.06/07, 634.0, 685.282/284/289/290, 979.2
Where it sits
Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 368 (models 0**, 1**) · Series 382 (models 11*, 175, 177, 178, 18*) · Series 384 (models 06*, 07*) · Series 634 (models 0**) · Series 685 (models 282, 284, 289, 290) · Series 904 (models 9**) · Series 906 (models 900, 901, 902, 903, 910, 911, 912, 913, 915, 916, 917, 918, 919, 920, 921, 922, 923, 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, 940, 941, 944, 945, 946, 947, 948, 949, 950, 951, 952, 953, 954, 955, 956, 960, 961, 963, 964, 965, 966, 967, 970, 972, 973, 974, 975, 977, 982, 983, 984, 985, 987, 988, 989, 990, 991, 992, 993, 994, 995, 998) · Series 979 (models 2**)
EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 368 (models 0**, 1**) · Series 382 (models 11*, 175, 177, 178, 18*) · Series 384 (models 06*, 07*) · Series 634 (models 0**) · Series 685 (models 282, 284, 289, 290) · Series 904 (models 9**) · Series 906 (models 900, 901, 902, 903, 910, 911, 912, 913, 915, 916, 917, 918, 919, 920, 921, 922, 923, 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, 940, 941, 944, 945, 946, 947, 948, 949, 950, 951, 952, 953, 954, 955, 956, 960, 961, 963, 964, 965, 966, 967, 970, 972, 973, 974, 975, 977, 982, 983, 984, 985, 987, 988, 989, 990, 991, 992, 993, 994, 995, 998) · Series 979 (models 2**)
Also applies to engines/gearboxes: 924 91*, 924 93*, 924 94*, 924 97*, 924 98*, 924 99*, 926 90*, 926 91*, 926 92*, 926 93*, 926 94*, 926 96*, 926 97*, 926 98*, 926 99*
AR09.41-B-8681A
| Remove/install charge air manifold
| 03.02.2020
|
Engine
| 904.9, 906.9 (except 906.999), 924.9 (except 924.92), 926.9 (except 926.95) in model 368.0/1, 382.11/175/177/178/18, 384.06/07, 634.0, 685.282/284/289/290, 979.2
|
1
| Charge air intake manifold
|
2
| Bolt
|
3
| Clamp
|
4
| O-ring
|
5
| Cover
|
6
| Connector
|
7
| Pressure and temperature sensor
|
8
| Gaskets
|
9
| Cylinder head cover
|
10
| Bolt
|
11
| Intake pipe
|
12
| Sealing gasket
|
| Remove/install
|
|
|
1
| Remove the cylinder head cover (9)
|
.
| AR01.20-B-5014B
|
2
| Remove the cover (5), unlatch and disconnect the connector (6) from the sensor (7)
|
|
|
3
| Remove the clamp (3)
| Installation: Replace the O-Ring (4).
|
|
4
| Remove the intake pipe (11)
| Installation: Replace the gasket (12).
|
|
|
|
| Intake tube to supercharger air intake manifold
| *BA09.41-B-1008-01B
|
5
| Unscrew the bolts (2), remove the manifold (1) and the gaskets (8)
| Clean the sealing surfaces.
|
|
|
|
| Installation: Replace the gaskets (8). Observe the gaskets assembly position.
|
|
|
|
| .Intake manifold to cylinder head
| *BA09.41-B-1002-01B
|
6
| Install in reverse order
|
|
|
Supercharging air/charge air cooling pipe
|
Number
| Designation
|
| Engine 904.9, 924.9, 906.9, 926.9
|
BA09.41-B-1002-01B
| Intake manifold to cylinder head
| Nm
| 25
|
Supercharging air/charge air cooling pipe
|
Number
| Designation
|
| Engine 904.9, 924.9, 906.9, 926.9
|
BA09.41-B-1008-01B
| Intake tube to supercharger air intake manifold
| Nm
| 50
|
Referenced documents
