ar0941b2010evi
Remove/install charge air temperature sensor in charge air housing
Type ar · topic 09.41 · version 0100 · 2018-09-12
Applies to: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)
Where it sits
Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 382 (models 155, 189) · Series 936 (models 9**)
EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 382 (models 155, 189) · Series 936 (models 9**)
AR09.41-B-2010EVI
| Remove/install charge air temperature sensor in charge air housing
| 10.09.2018
|
Engine
| 936.9 in model 382.155/189
|
|
| with code MS6 (Euro VI)
|
B617
| Charge air temperature sensor
|
Topical note
| Notes on avoiding damage through contamination and foreign objects
|
| AH00.00-N-5000-01H
|
| Remove/install
|
|
|
1
| Open the engine compartment
| The access to perform maintenance and repair works varies according to the manufacturer and the body type.
|
|
2
| Disconnect the electric connector in the charge air temperature sensor (B617)
|
|
|
3
| Remove the charge air temperature sensor (B617)
| Installation: Replace the sealing ring.
|
|
|
|
| Supercharging air temperature sensor in the supercharging air distributor
| *BA09.41-B-1002-04EVI
|
4
| Install in reverse order
|
|
|
Supercharging air sensor
|
Number
| Designation
|
|
| ENGINE 936.9
|
BA09.41-B-1002-04EVI
| Supercharging air temperature sensor in the supercharging air distributor
| M14x1.5
| Nm
| 35
|
Referenced documents
- ah0000n500001h Notes on avoiding damage through contamination and foreign objects
