ar0941b2008evi

Remove/install charge air pressure and temperature sensor

Type ar · topic 09.41 · version 0100 · 2018-10-16

Applies to: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 382 (models 155, 189) · Series 936 (models 9**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 382 (models 155, 189) · Series 936 (models 9**)

AR09.41-B-2008EVI

Remove/install charge air pressure and temperature sensor

02.10.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Remove/install charge air pressure and temperature sensor

1

Pressure difference metering pipe

B616

Pressure and temperature sensor of the supercharging air

B09.41-A000-12

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Remove/install

1

Open the engine compartment

The access to perform maintenance and repair works varies according to the manufacturer and the body type.

2

Disconnect the electric connection in the pressure and temperature sensor of the supercharging air (B616) in the pressure difference metering pipe (1)

3

Remove the pressure and temperature sensor of the supercharging air (B616) from the pressure difference metering pipe (1)

Installation: Replace the O-Rings.

Pressure sensor screw and supercharging air temperature on pressure measurement pipe

*BA09.41-B-1001-04EVI

4

Install in reverse order

Supercharging air sensor

Number

Designation

ENGINE 936.9

BA09.41-B-1001-04EVI

Pressure sensor screw and supercharging air temperature on pressure measurement pipe

Nm

10

Referenced documents