ar0940s6022cb

Remove/install oil feed line for turbocharger

Type ar · topic 09.40 · version 0100 · 2013-08-13

Applies to: MODEL 415 with ENGINE 200

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.40 Turbocharger — Series 415

EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.13 Line/hose/valve — Series 415

Also applies to engines/gearboxes: 200 ***

AR09.40-S-6022CB

Remove/install oil feed line for turbocharger

24.07.2013

MODEL

415 with ENGINE 200

Remove/install oil feed line for turbocharger

1	Banjo bolt
2	Screw/bolt
3	Banjo bolt
4	Oil feed line

S09.40-4521-06

 	Remove/install
1	Remove catalytic converter		AR49.10-S-5500CB
2	Remove banjo bolt (1).	 Banjo bolt, oil feed line to turbocharger	*BA09.40-N-1004-01T
3	Remove screw/bolt (2)
4	Remove banjo bolt (3).	 Banjo bolt, oil feed line to crankcase	*BA09.40-N-1005-01T
5	Remove oil feed line (4)	 Installation: Always install a new oil feed line (4).
6	Install in the reverse order
	Check
 Danger !	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
7	Check for leaktightness with engine running	 Visual inspection only.

 Turbocharger

Number	Designation		ENGINE 200 in MODEL 415
BA09.40-N-1004-01T	Banjo bolt, oil feed line to turbocharger	Nm	12

 Turbocharger

Number	Designation		ENGINE 200 in MODEL 415
BA09.40-N-1005-01T	Banjo bolt, oil feed line to crankcase	Nm	40

Referenced documents

ar4910s5500cb Remove/install catalytic converter
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.