S09.40-A003-79
1 | Pressure transducer | 4 | Vacuum hose | 7 | Vacuum line | ||
1.1 | Bracket | 5 | Front vacuum cell | 8 | Vacuum hose with filter | ||
2 | Electrical line | 6 | Vacuum hose | 9 | Screw | ||
3 | Electrical connector |
1 | Pressure transducer |
4 | Vacuum hose |
6 | Vacuum hose |
8 | Vacuum hose with filter |
10 | Bracket |
11 | Screw |
S09.40-A004-82
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove engine cover. | ||
2 | Unclip electric line (2) from holder (1.1). | WIS Service Media | |
3 | Disconnect electrical connector (3). | ||
4 | Detach vacuum hose (4) from the front vacuum cell (5). | ||
5 | Detach vacuum hose (6) from the vacuum line (7). | ||
6 | Unclip vacuum hose with filter (8). | ||
7 | Remove screw (9). | Holder, pressure transducer for front vacuum cell to engine lifting lug | |
8 | Remove pressure transducer (1) together with the bracket (10), vacuum hoses (4, 6) and vacuum hose with filter (8) upward. | ||
9 | Remove vacuum hoses (4, 6) and vacuum hose with filter (8) from the pressure transducer (1). | If a new pressure transducer (1) is installed. | |
10 | Remove screws (11) and remove pressure transducer (1) from the bracket (10). | If a new pressure transducer (1) is installed. | |
Screw, pressure transducer for front vacuum cell to holder | |||
| Check | ||
11 | Check vacuum hose (4) for damage. | If damage is identified, | |
| |||
replace vacuum hose (4). | |||
12 | Check vacuum hose (6) for damage. | If damage is identified, | |
| |||
replace vacuum hose (6). | |||
13 | Check vacuum hose with filter (8) for damage. | If damage is identified, | |
| |||
replace vacuum hose with filter (8). | |||
14 | Install in the reverse order |
Referenced documents
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ar0110s2405ea Remove/install engine cover