ar0940p602011mc

Tightening pattern for exhaust manifold

Type ar · topic 09.40 · version 0110 · 2018-10-09

Applies to: Engine 275 in model 215, 216, 220, 221, 230 Engine 279 in model 231

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.40 Turbocharger — Series 215 · Series 216 · Series 220 · Series 221 · Series 230 · Series 231

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.41 Manifold/pipe/muffler/exhaust gas hose — Series 215 · Series 216 · Series 220 · Series 221 · Series 230 · Series 231

Also applies to engines/gearboxes: 275 ***, 279 ***

AR09.40-P-6020-11MC

Tightening pattern for exhaust manifold

Engine

275 in model 215, 216, 220, 221, 230

Engine

279 in model 231

Exhaust gas turbocharger

Number

Designation

Engine 279

BA09.40-P-1001-01V

Nut, exhaust gas turbocharger/exhaust manifold to cylinder head

M7

Nm

15

Turbocharger

Number

Designation

Engine 275

BA09.40-P-1011-01H

Exhaust manifold to cylinder head

Nm

15

Tightening pattern for exhaust manifold

285 589 00 61 00

Assembly tool

Tightening pattern for exhaust manifold

Do not use any assembly paste or similar product!

1

Tighten all the nuts (1 to 12) to the specified tightening sequence with the specified torque.Engine 275 in model 215, 216, 220, 221, 230
  Engine 279 in model 231 



2

Detach assembly tool (01, 02).



3

Tighten all the nuts (1 to 12) once again to the specified tightening sequence with the specified torque.


P09.40-2106-06