ar0940d602005d
Detach, install exhaust fitting and engine brake flap fitting at turbocharger
Type ar · topic 09.40 · version 0108 · 2008-07-15
Applies to: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670
Where it sits
Function group 1 Engine › 09 Air intake, turbocharging › 09.40 Turbocharger — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)
EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.51 Exhaust gas turbocharger — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)
EinPAS 21 Brakes/vacuum system/compressed-air system › 21.20 Engine brake › 21.20.35 Valve fitting/cylinder — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)
AR09.40-D-6020-05D
| Detach, install exhaust fitting and engine brake flap fitting at turbocharger
|
|
|
Number
| Designation
| Engines
900.9, 902.9, 904.9, 906.9
|
|
|
|
|
|
|
|
|
|
|
|
|
BA14.10-N-1002-01B
| Nut, engine brake flap fitting to turbocharger
| M8
| Nm
| 30
|
|
|
| M10
| Nm
| 50
|
1 Unscrew nuts (2) at engine brake flap fitting (1).
Installation: Replace nuts (2).
Pay attention to tightening torque.
2 Remove engine brake flap fitting (1) from turbocharger (3).
Seal off openings on turbocharger (3).
3 Install in the reverse order.
