AR09.40-D-1005WE | Remove/install pressure transducer for wastegate aneroid capsule | 23.5.11 |
ENGINES 651 in MODEL 900
ENGINES 651.955 /957 in MODEL 906
D09.40-0086-06
1 Bolt
2 Vacuum hose
3 Vacuum hose
4 Electrical connector
5 Bolts
B5/9 Low-pressure turbocharger boost pressure sensor
Y77/7 Waste gate pressure transducer
| Remove/install | ||
1 | Remove glow output stage | ||
2 | Remove bolt (1) and place low-pressure turbocharger boost pressure sensor (B5/9) to one side | ||
3 | Detach vacuum hoses (2, 3) | Installation: Note the different diameters of the vacuum hoses (2, 3). Check vacuum hoses (2, 3); replace if necessary. | |
4 | Disconnect electrical connector (4) on wastegate pressure transducer (Y77/7) | ||
5 | Remove bolts (5) and wastegate pressure transducer (Y77/7) | ||
6 | Install in the reverse order | ||
7 | Connect Star Diagnosis and perform initialization | If replacing wastegate pressure transducer (Y77/7). |
Referenced documents
- ad0000d200004sd Connect STAR DIAGNOSIS and read out fault memory
- ar1520d4500we Remove/install glow output stage