AR09.40-D-1003WE | Remove/install pressure transducer for boost pressure aneroid capsule | 23.5.11 |
ENGINES 651 in MODEL 900
ENGINES 651.955 /957 in MODEL 906
D14.30-1114-08
1 Electrical connector
2 Vacuum hose
3 Vacuum hose
Y93/1 Boost pressure control flap pressure transducer
4 Bolt
5 Bolt
| Remove/install | ||
1 | Remove engine trim panel | ||
2 | Disconnect electrical connector (1) from boost pressure control flap pressure transducer (Y93/1) | ||
3 | Detach vacuum hoses (2, 3) | Installation: Note the different diameters of the vacuum hoses (2, 3). Check vacuum hoses (2, 3); replace if necessary. | |
4 | Remove bolt (5) by two revolutions | ||
5 | Remove bolt (4) and boost pressure control flap pressure transducer (Y93/1) upwards | ||
6 | Install in the reverse order |
Referenced documents
- ar0110d2405we Remove/install engine cover