Function group 1 Engine › 09 Air intake, turbocharging › 09.20 Intake manifold, intake manifold preheater — Series 118 · Series 177 · Series 247
EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 118 · Series 177 · Series 247
Also applies to engines/gearboxes: 282 ***
AR09.20-P-1400-02MFD
Intake module sealant path
Engine
282 in model 118, 177, 247
Repair materials
Number
Designation
Order number
BR00.45-Z-1013-01A
Sealant, Loctite 5970, 50 ml
A 003 989 98 20 10
BR00.45-Z-1038-04A
Loctite 7200
Henkel AG & Co. KGaA http://www.loctite.de
BR00.45-Z-1046-04A
Loctite 7063 (400 ml) cleaning spray
A 001 986 71 71 09
The components must not be lifted off each other again after the joining process. Remove excess, leaked out sealant from adjacent sealing surfaces after tightening of intake module.
1
Clean rectangular areas .
The sealing surfaces on the cylinder head cover must be dry and free from dust, oil and grease. Do not touch sealing surfaces with bare hands, wear protective gloves at all times.
2
It must Apply sealant in form of a dot at the specified positions (arrows A) with a diameter of 5 mm (+5 mm).
Use only the sealant listed in the repair products. Application temperature of the sealant is +7 °C to +25 °C. Do not spread sealant. Install intake module within 13 min of applying the sealant.
