AR09.10-B-8250E | Detach, attach air intake duct | 12.02.16 |
Cumbustion engine 475.9, 476.9 with Vehicle 695.0
B09.10-0099-05
1 Clamp of the air tube's flexible hose
2 Intake tube
3 Bolt
4 Compressor tube clamp
5 Joint tube clamps of the turbocharger
| Remove and install | ||
Danger! | Risk of personal and material damage when cranking the engine with the gearbox engaged in gear. Risk of personal damage when carrying out jobs with the engine heated-up or running. | Be sure the gearbox is in neutral. Wear appropriate clothing and pay attention to moving and heated-up parts. | |
1 | Turn-off the master switch, or detach the battery's negative lead. | Loosen the bolt on the side rail avoiding loosening the poles. | |
2 | Tilting the engine hood. | On vehicles with chassis: 386.0; 386.3; 388.0. | |
3 | Open the engine rear cover. | On vehicles (buses): 664.0; 664.1; 664.2. | |
4 | Slacken the clamp (1) and detach the flexible hose. | ||
5 | Slacken the clamp (4) and detach the hose at the turbocharger. | ||
6 | Slacken the turbocharger joint clamps (5). | ||
7 | Remove the bolt with nut (3). | | |
8 | Remove the air intake tube (2). | Plug the turbocharger's opening to avoid impurities. | |
9 | Install in reverse order. | Check the clamps and hoses, if necessary replace them. |
Intake manifold
Referenced documents
- ar8840b1000a Opening engine hood, moving to upright position and closing
- as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.