ar0850d0127te

Remove/install coolant radiator of main circuit

Type ar · topic 08.50 · version 0101 · 2019-12-03

Applies to: Engine 780.703 in model 910

Where it sits

Function group 1 Engine › 08 Electric drive, hybrid drive › 08.50 Temperature management — Series 910

EinPAS 16 Fuel/power supply to engine › 16.25 Cooling/heating high-voltage on-board electrical system/fuel cell › 16.25.21 Heat exchanger/evaporator/cooler/condenser/desiccant — Series 910

Also applies to engines/gearboxes: 780 703

AR08.50-D-0127TE

Remove/install coolant radiator of main circuit

28.11.2019

Engine

780.703 in model 910

Remove/install coolant radiator of main circuit

D08.50-A015-79

1

Radiator

2

Bolts

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Remove radiator unit.

AR08.50-D-0120TE

2

Remove screws (2).

Screw, main circuit coolant radiator to supporting frame

*BA08.50-N-1002-01TE

3

Remove coolant radiator (1).

4

Install in the reverse order.

Cooling system

Number

Designation

Engine 780.703 in model 910

BA08.50-N-1002-01TE

Screw, main circuit coolant radiator to supporting frame

Nm

4

Referenced documents